Products Description
No.1 Good performance
Delayed power-off--The first in China
◆The machine will be powered off in case the machine has been powered on but not in use for at least 10 minutes, which is safe and energy-saving.
◆Load sensing hydraulic system Load-sensitive hydraulic system ensures the fork to lift with full load while the engine is running idly so as to reduce fuel consumption.
◆Strengthened chassisIntegrated design with strengthened tail stock ensures safer operation.
◆ Enhanced working unit
Lifting speed is improved by 5%.
◆Three-gear drive mode
Mast, chains and oil tanks of 1-3.5t internal combustion forklift are enhanced for operation with heavy load.
No.2 Safe and reliable
◆Engine electrical system adopts eater-proof connectors
The imported water-proof connectors are more reliable.Water-proof grade Ip65
◆Reliable sealing of oil tank cover
The cover adopts flange sealing against leak.
◆24° cone+Oring
The hydraulic system adopts the most advanced sealing.
◆High quality hydraulic system
The system is equipped with a return oil filter to improve reliability and service life.
◆Battery insulation plate
Insulation plates are provided between the battery and exhaust pipe for 2-3.5t internal combustion forklift to prolong service life of battery.
No.3 High efficiency
◆Spacious cab
Ergonomics-based design ensures easy operation.
◆Wide mast
Wide mast broadens visual field.
No.4 Easy for maintenance
◆Early-waning of instruments service is provided
Regular early-waming of instruments service realizes intelligent service.
◆Large opening angle of engine hood
The engine hood can be lifted to 80° for easy maintenance.
FD40 |
Product parameter |
Model |
|
FD40 |
Rated lifting load |
kg |
4000 |
Load center distance |
mm |
500 |
Free lifting height |
mm |
150 |
overall length ( With fork/Without fork ) |
mm |
4000/2930 |
Width |
mm |
1290 |
Overhead guard height |
mm |
2180 |
Wheelbase |
mm |
1900 |
Minimum ground clearance |
mm |
140 |
Mast tilt angle (front/rear) |
% |
6°/12° |
Tire no. (before) |
|
250-15-16PR |
Tire no. (after) |
|
7.00-12-12PR |
Minimum turning radius (outer side) |
mm |
2710 |
Minimum right angle aisle width |
mm |
4750 |
Fork size |
mm |
1070x150x50 |
maximum working speed(Full-load/No-load ) |
km/h |
19/19 |
maximum lifting speed(Full-load/No-load ) |
mm/s |
340/380 |
maximum gradeability(Full-load/No-load ) |
% |
15/20 |
Forklift weight |
kg |
4950 |
Engine model |
|
全柴Quanchai4C4-50V31 or Isuzu |